|
| Size
of Tire |
For
Bicycle Tire, Industrial Tire, Agriculture Tire, Motorcycle Tire, Passenger
Tire, Bus&Truck Nylon Cord Cutting. |
For
P/C, L/T-R Tire High Table |
| Cutting
Angle |
Max.35o
~ 90o ±0.2o |
80o
~ 90o ±0.2o |
| Cord Width |
Max.1,500mm |
Max.1,000mm |
| Cutting Rate |
25cut/min (Cutting
width 400mm) |
25cut/min (Cutting
width 400mm) |
| Speed of Conveyor |
6 ~ 60m /min
Adjustable |
6 ~ 60m /min
Adjustable |
| Cutting Width |
100mm ~1500mm |
100mm ~1500mm |
| Max.
Dia of Cord |
¢1400mm |
¢1400mm |
| Bed
Width |
1700mm |
1700mm |
| Knife
Guide |
Special
Design |
Special
Design |
| Knife
Carrier |
Special
Design |
Special
Design |
| Cutting
Angle Adjust |
Auto
Counter Digital Control |
Auto
Counter Digital Control |
| Cutting
Width Control |
Auto
Counter Digital Control (Right angle width) |
Auto
Counter Digital Control (Right angle width) |
| Motor |
Total
7.5HP |
Total
7.5HP |
| Power
Source |
AC
x 380/ 220Vx50HZx3¢ |
AC
x 380/ 220Vx50HZx3¢ |
| Compress
Air |
5~7kgf
/ cm2 |
5~7kgf
/ cm2 |
| Measurement |
4150Wx2257HxL6-10m |
4150Wx2257HxL6-10m |
 |
Nylon Cord
Bias Cutter |
|
Tread Cooling
& Cutting Train |
|
Bladder Curing
Press |
|
Digital Bead
Wire Inner Circle Lenght Measuring Machine |
|
Inner Liner
Calending Train. |
|
Hot Water Generating
System. |
| The followings are the
features of this machine |
| Main
Body |
| 1. |
The frame
structure's rigid is excellent, therefore it is getting high steadity. |
| 2. |
The conveyor
belt is made with high tensile and low viscosity materials, so that the
core could been taken away easier. |
| 3. |
The special
driving device gets cord length in high accruate. And it is durable with
high steady. |
| 4. |
The adjusting
device of conveyor belt for tensile and off-centering is easier to operate
for adjustment. |
| Cord
Servicer |
| 1. |
It is
automatically let-off and wind-up, and has stable transmission. The tension
of cord & liner can be adjusted by air regulator. |
| 2. |
It is
ready for many kinds type of core. And it is easier for the core to mount
or dismount. |
| 3. |
The cord's
core and liner's core can be revolved or reversed. So thtat let-off or
wind-up can be done simply. |
| 4. |
It can
auto-inspectes that the cord adhered to cloth liner, and dissolves itself
automatically. |
| 5. |
It can
auto-inspectes that the cord to be end, and stop running immediately. |
| 6. |
It has
a special design for quick change cord by one preson. |
| Cutting
System |
| 1. |
It get
a high cutting rate, for single direct cutting rate max.25pcs/min. |
| 2. |
The accuracy
of cutting width was controlled by A.C. servo motor, getting high speed,
high accuracy & high service life. |
| 3. |
The cutting
angle can be set by numeral and adjusted by motorization automatically,
getting good accuracy in ±0.25. |
| 4. |
It is
design with a function of the width of cord can be calculated directly
when the cutting angle changed, so the cutting angle and width of cord
can be set directly with numeral. |
| 5. |
The cutting
device was designed specially, getting steady, silent, speedy, less trouble
and endurable. |
| Wind-up
Stand |
| 1. |
The whole
stand can be adjusted the position to suit the direction of the angle
of the cutted cord, making the operation in good conditin, so that, saving
man power and increasing working efficiency. |
| 2. |
Wind-up
is at constant speed, so that, the cord coule be always in flat that satisfing
the building process on quality and efficiency. |
| 3. |
It is
operated by one person with high efficiency. |
| Address : |
P.O. Box 513, Yuan Lin,
Chang Hua, Taiwan, R.O.C. |
| Tel : |
886-4-8322471 |
| Fax : |
886-4-8342822 |
| Contact person : |
Shio-Shen Ho |
| Title : |
General Manager |
| E-mail : |
kayton@ms22.hinet.net |
Professional
tire machine
tire making machine
tire
equipment
Copyright 1998
KAYTON INDUSTRY CO., LTD.
Web site designed
and hosted by
Taiwan
Products Online
|
